MFC Dongle Initial Setup Instructions

This is a guide for the setting up of a new MFC Dongle which is used to read / crack the passwords on iPhones.
You can buy MFC Dongle Here

Preparation

Make a folder on your desktop and call it mfc-dongle
It may be a good idea to disable your antivirus too, or at least exclude this folder in your antivirus, as these files are themidia protected and your av may try to delete or quarantine them.

Downloading and installing drivers.

1. Download and unzip MicrosoftRedistributables.zip to the mfc-dongle folder you made
go in the MicrosoftRedistributables folder and install vcredist_x86.exe and vcredist_x64.exe
2. Download and unzip DongleDrivers.zip to the mfc-dongle folder you made
go in the DongleDrivers foldr and run the InstallDriver.exe
To install the dongle update driver you need to connect MFC dongle to computer in BOOT MODE.
Use the red cable to bridge the 2 points together P0 and GND (see images below) and once done, connect the dongle to your PC
Once drivers are installed you can now disconnect the dongle

Downloading Server Client and getting latest software.

Download MFCDL_2.0.exe to the mfc-dongle folder you made
Run MFCDL_2.0 and press the start button
Select the appropriate update and press next, This will then download the software to the mfc-dongle folder

Running Software, Reading Serial For Registration

Connect mfc dongle to PC
Run MFC_1.0.8.exe (or higher / newer) you just downloaded
Select any update from the drop down box and tick update, this will read your serial and program your dongle Serial number. this will also program your dongle and now its ready to use.

Registration

Easa Telecom